.png)
.png)
A BIG Van means BIG drawers and with numerous sizes and layouts available, we have a setup to suit ALL makes and models including but not limited to the following:
•Toyota Hiace ZR - 2022-current
•Ford Transit
•LDV G10
•Mitsubishi Express
•Hyundai iLoad and Staria
•VW Transporter
•Renault Trafic
•MB Vito
•plus others...
The base system uses two long drawers accessed at the rear lift-up door. For twin sliding side door models, we have 2 wide/short drawers accessed via each side door or for those with a single sliding side door a single wide/long drawer is used.
As with our other offerings, you can choose your preferred drawer depth. Standard is 250mm deep, with a 300mm and 335mm options, with or without heavy duty 227kg rated runner hardware. Keep in mind the drawers internal width and depth change when runners are added.
There are plenty of options for layout based off our standard components. Front only or rear only drawer sets. Single rear drawer with ladder storage beside. We can also sub in our TRIPLEDOUBLE drawer set. If the standard options don't suit you we can definitely put together a setup that will.
Our ECOSTACK racking system can also be added for the complete fitout solution.
For the tradies out there these setups give a ton of secure storage and a nice flat surface for stacking material but for the campers and adventurers, add a "Kitchen" set-up in one of the drawers and a comfy mattress on top and hit the road.
Scroll down to see how to order yours!
JUMBO VAN - Hiace ZR, Ford Transit, Hyundai iLoad/Staria, LDV, Mitsubishi Expres
The drawer and drawer carcass are made using precise, CNC cut 16mm black PVC board which uses a compressed and extruded PVC production method. Our drawer sets ARE NOT MADE OF PLYWOOD and unlike plywood, our product isn't affected by moisture, doesn't splinter or split, is extremely durable but lightweight and of course very good-looking and subtle in black. Base model fit outs do not use runner hardware as the make-up of the material used allows a smooth action for opening and closing of the drawers. Of course, Heavy Duty 227kg rated runner hardware can of be added at the specified additional cost. This option also includes our handy "one hand" handle which lock outs when closed as well as mid and at full extension.
The false floor 'Topper' will easily handle some rough n' tumble. It's made from 12mm Trans-Tex 220 European Birch heavy transport grade plywood. This is extremely hard-wearing, water-resistant and easy to clean down plywood with fully sealed edges.
Drawer dividers are also included which you can fit off wherever you wish and all mounting hardware is supplied.
Internal Drawer Dimensions -
Basic Model -
Rear 1165L x 540W x 250D or 300D
Side 560L x 680W x 250 or 300
Runner Model -
Rear 1165L x 500W x 235, 285 or 335D
Side 560L x 640W x 235,285 or 335D
.png)
